Hikari Head Light Regeneration System
HIKARI HEAD LIGHT REGENERATION SYSTEM is :
Japan Latest Patented Technology.
Removes haze and yellowing from sun and dirt and restores headlight to like-new conditions.
Clear your lens in just seconds.
Provides 2 years of UV protection for your headlight lenses.
No power tools needed. The kit includes everything you need to restore both headlight lenses.
Can be used on: headlights, taillights, turn signal lights, reflective lens covers.
In four easy steps, you can achieve professional results with no power tools needed.
Headlights guaranteed to pass inspection for the lifetime of your vehicle.
Easy to apply, lasts through hundreds of car washes
Apply once and lasts for years while saving time and money.
Main Features :
❖ NO NEED TO POLISH
❖ NO NEED TO WIPE
❖ NO POWER TOOL REQUIRED
❖ DURABLE UV COATING
❖ QUICK and EASY OXIDATION REMOVAL
❖ PROFESSIONAL RESULT
❖ CLAY TYPE
HOW TO APPLY
※Do not use in areas with wind and dust, on really hot days, in rain, or when the headlights are hot.
※Do not use on cars with glass headlights, or headlights with wipers or headlight washers.
※Do not use on rainy days, in areas of high humidity, in areas of less than 10℃.
※Please read the instructions before using.
Wipe dirt from the surface of the headlight using a wet cloth.
※If any dirt is in the gaps between the headlights, clean with water before proceeding.
※Before carrying out work, open the bonnet to create a slight space between the headlight and bonnet.
Wet the headlight with water so that any dirt, damaged coating flakes and foreign objects etc. can be smoothly wiped away with a clay cleaner. If the surface is heavily dirtied, clean with water and check if the dirt has been removed. If not, continue to clean with water until removed.
※Carry out work until the layers of yellow tint disappear and the clay cleaner runs smoothly along the surface of the headlight.
※Use the clay cleaner on clean surfaces.
※Before cleaning, cover any parts of the car that divide the headlights with masking tape to prevent scratches (if applicable)
Wipe any dirt, damaged coating flakes etc. from the headlight with a wet cloth. Finally wipe with a clean, dry cloth (making sure no moisture remains on the surface).
※If there are any yellow tints or unevenness after washing, carry our stage II Special Cleaning once more.
※If dirt cannot be completely wiped away, was the headlight with water and remove moisture.
※When using a degreaser or alcohol etc, wipe away any surplus with a dry cloth.
IV. Coating Application
Apply the coating to the top part of the specially designed sponge and apply an even coat to the top of the headlight, wiping quickly from right to left. To avoid an uneven coat, do not layer the coating (the coating naturally creates a smooth finish).
※Make sure that the masking tape is dry before carrying out work (if applied in the previous stage), as the coating does not work well with moisture.
※When leaving the coating to dry, makes sure that no moisture or foreign objects come into contact with the coating.
※When leaving the coating to dry completely, do not wipe or touch the applied surface.
※As the coating does not work well with moisture and humidity, do not leave outside on winter days right after applying.
※Allow the coating to dry indoors for 10 minutes in summer and for 40 minutes in winter (at 15℃ with 40% humidity).
※In summer the coating dries quicker, so please carry out work quickly in summer.
※If lines appear when applying the coating, please apply another coat.
※After applying the coating, refrain from washing the car for approximately two hours.